产品为0.6-0.8mpa。 使用高压气源可能会对产品造成损坏。尽量防止机器空转，以免影响使用产品的寿命.当工作完成，机器长期不使用时，必须切断气源以释放机器中的剩余空气。 否则可能发生事故。 使用前请穿戴好劳动防护用品 注意：关闭阀门前，必须切断气源！

The safe working air pressure of this product is 0.6-0.8mpa. Using a high air pressure source may cause damage to the product. Try to prevent the machine from idling to avoid affecting the service life
of the product. When the work is completed and the machine is not used for a long time, the air source must be cut off to release the remaining air in the machine. Otherwise, accidents may occur. Please wear labor protection articles before use
Note: before closing the valve, the air source must be cut off!

油泵由空气供电，是适用于泵送和出料滚筒容器中的各种液体。 (注：本产品的接触部分液体是SUS，密封部分是NBR。 不适合提取能腐蚀这两种液体的液体材料。 本产品采用原则在气压方面，桶必须装满用压缩空气，液体就可以提取了)
本泵适用于船舶，工厂和仓库。 它可以泵液体在两个方向和工作。高速度。 只需将其插入密封的铁中即可桶去工作。 适用于提取以及汽油、柴油、煤油的排放，水和其他液体，以及其他液体中等粘度液体。

The oil pump is powered by air , is suitable for pumping and discharging various liquids in the drum container. (Note: The contact part of this product with liquid is SUS, and the sealing part is NBR. It is not suitable for the extraction
of liquid which can corrode these two materials. This product adopts the principle of air pressure, the barrel must be filled with compressed air, the liquid can be extracted)
This pump is suitable for use in ships, factories and warehouses. It can pump liquids in both directions and work.high speed. Simply plug it into the sealed iron bucket to work. Suitable for the extraction
and discharge of gasoline, diesel, kerosene, water and other liquids, as well as other medium viscosity liquids.